Hi, I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
My hardware configuration is as follows
AMD Opteron 165 (dual-core) CPU Asus A8R MVP (05/03 BIOS) Sapphire X800GTO2 256 MB PCIe video card Seagate 7200.7 200 GB hard drive (with several partitions) Pioneer 109 DVD-ROM NEC 2510 DVD burner (used to install)
Any ideas what's causing the problem?
64-bit Installation woes, help?
I forgot to note that I'm using 1 GB of PC3200 RAM
Well, there are many colored phases of setup, where did you reach? Did it begin copying files? Did it almost complete setup? How was setup launched, from within an existing version of Windows or your booted from the DVD? -- -- Andre Windows Connected | http://www.windowsconnected.com Extended64 | http://www.extended64.com Blog | http://www.extended64.com/blogs/andre http://spaces.msn.com/members/adacosta
"Chris H." <Chris H.@discussions.microsoft.com> wrote in message
Hi, I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
My hardware configuration is as follows
AMD Opteron 165 (dual-core) CPU Asus A8R MVP (05/03 BIOS) Sapphire X800GTO2 256 MB PCIe video card Seagate 7200.7 200 GB hard drive (with several partitions) Pioneer 109 DVD-ROM NEC 2510 DVD burner (used to install)
Any ideas what's causing the problem?
Whichever one the first phase is, this is where it freezes. Like I said, I get the XP-like loading screen where it says "Microsoft Corporation 2006" or something along those lines. When that stops, I get this blue-teal screen and a cursor appears. There's nothing that happens after that, I have control of the cursor for a little while, then it just freezes and I can't move the cursor any more. As far as I can tell there's nothing that gets copied or loaded (at least there's no indication that there is).
"Andre Da Costa [Extended64]" wrote:
Well, there are many colored phases of setup, where did you reach? Did it begin copying files? Did it almost complete setup? How was setup launched, from within an existing version of Windows or your booted from the DVD? -- -- Andre Windows Connected | http://www.windowsconnected.com Extended64 | http://www.extended64.com Blog | http://www.extended64.com/blogs/andre http://spaces.msn.com/members/adacosta
"Chris H." <Chris H.@discussions.microsoft.com> wrote in message Hi, I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
My hardware configuration is as follows
AMD Opteron 165 (dual-core) CPU Asus A8R MVP (05/03 BIOS) Sapphire X800GTO2 256 MB PCIe video card Seagate 7200.7 200 GB hard drive (with several partitions) Pioneer 109 DVD-ROM NEC 2510 DVD burner (used to install)
Any ideas what's causing the problem?
check on the ISO to find out its integrity. Nero MD5 Verifier is a recommended choice. If setup still fails, its likely a bad download.
I use the one from Ahead Nero http://ww2.nero.com/nero6/eng/Nero_MD5_Verifier.html
Here are the MD5/CRC values for x86 or x64 depending on which every ISO you downloaded:
x86 - File Size = 3.12 GB (3,355,598,848 bytes) - CRC Value = 0x67E089E0 - MD5 Value = 0E733AB1A8E8FF9A8684FD3639332773 x64 - File Size = 4.01 GB (4,309,368,832 bytes) - CRC Value = 0x48697711 - MD5 Value = E43502D0A15EADD551119D5639859E04
Paste the MD5 Checksum for either x64 or x86 depending on which one you want check in Step 1, Step 2 - Browse to where you stored the ISO on your drive and open it and it will automatically start the varification process and generate the has in the third field, if it matches Step 1, then you are safe.
-- -- Andre Windows Connected | http://www.windowsconnected.com Extended64 | http://www.extended64.com Blog | http://www.extended64.com/blogs/andre http://spaces.msn.com/members/adacosta
"Chris H." wrote in message
Whichever one the first phase is, this is where it freezes. Like I said, I get the XP-like loading screen where it says "Microsoft Corporation 2006" or something along those lines. When that stops, I get this blue-teal screen and a cursor appears. There's nothing that happens after that, I have control of the cursor for a little while, then it just freezes and I can't move the cursor any more. As far as I can tell there's nothing that gets copied or loaded (at least there's no indication that there is).
"Andre Da Costa [Extended64]" wrote:
Well, there are many colored phases of setup, where did you reach? Did it begin copying files? Did it almost complete setup? How was setup launched, from within an existing version of Windows or your booted from the DVD? -- -- Andre Windows Connected | http://www.windowsconnected.com Extended64 | http://www.extended64.com Blog | http://www.extended64.com/blogs/andre http://spaces.msn.com/members/adacosta
"Chris H." <Chris H.@discussions.microsoft.com> wrote in message Hi, I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
My hardware configuration is as follows
AMD Opteron 165 (dual-core) CPU Asus A8R MVP (05/03 BIOS) Sapphire X800GTO2 256 MB PCIe video card Seagate 7200.7 200 GB hard drive (with several partitions) Pioneer 109 DVD-ROM NEC 2510 DVD burner (used to install)
Any ideas what's causing the problem?
Already checked it, the ISO is fine. I've also burned it to 2 DVDs to make sure it wasn't a bad burn "Andre Da Costa [Extended64]" wrote:
check on the ISO to find out its integrity. Nero MD5 Verifier is a recommended choice. If setup still fails, its likely a bad download.
I use the one from Ahead Nero http://ww2.nero.com/nero6/eng/Nero_MD5_Verifier.html
Here are the MD5/CRC values for x86 or x64 depending on which every ISO you downloaded:
x86 - File Size = 3.12 GB (3,355,598,848 bytes) - CRC Value = 0x67E089E0 - MD5 Value = 0E733AB1A8E8FF9A8684FD3639332773 x64 - File Size = 4.01 GB (4,309,368,832 bytes) - CRC Value = 0x48697711 - MD5 Value = E43502D0A15EADD551119D5639859E04
Paste the MD5 Checksum for either x64 or x86 depending on which one you want check in Step 1, Step 2 - Browse to where you stored the ISO on your drive and open it and it will automatically start the varification process and generate the has in the third field, if it matches Step 1, then you are safe.
-- -- Andre Windows Connected | http://www.windowsconnected.com Extended64 | http://www.extended64.com Blog | http://www.extended64.com/blogs/andre http://spaces.msn.com/members/adacosta
"Chris H." wrote in message Whichever one the first phase is, this is where it freezes. Like I said, I get the XP-like loading screen where it says "Microsoft Corporation 2006" or something along those lines. When that stops, I get this blue-teal screen and a cursor appears. There's nothing that happens after that, I have control of the cursor for a little while, then it just freezes and I can't move the cursor any more. As far as I can tell there's nothing that gets copied or loaded (at least there's no indication that there is).
"Andre Da Costa [Extended64]" wrote:
Well, there are many colored phases of setup, where did you reach? Did it begin copying files? Did it almost complete setup? How was setup launched, from within an existing version of Windows or your booted from the DVD? -- -- Andre Windows Connected | http://www.windowsconnected.com Extended64 | http://www.extended64.com Blog | http://www.extended64.com/blogs/andre http://spaces.msn.com/members/adacosta
"Chris H." <Chris H.@discussions.microsoft.com> wrote in message Hi, I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
My hardware configuration is as follows
AMD Opteron 165 (dual-core) CPU Asus A8R MVP (05/03 BIOS) Sapphire X800GTO2 256 MB PCIe video card Seagate 7200.7 200 GB hard drive (with several partitions) Pioneer 109 DVD-ROM NEC 2510 DVD burner (used to install)
Any ideas what's causing the problem?
Andre, if it helps any, it would appear that Chris is having exactly the same problem I'm having - see my thread from yesterday (which you responded to) titled "Installation from bootable DVD problem".
The only difference is that Chris is installing the 64 bit version, while I'm attempting to install the x86 version of Vista.
"Chris H." wrote in message
Already checked it, the ISO is fine. I've also burned it to 2 DVDs to make sure it wasn't a bad burn "Andre Da Costa [Extended64]" wrote:
check on the ISO to find out its integrity. Nero MD5 Verifier is a recommended choice. If setup still fails, its likely a bad download.
I use the one from Ahead Nero http://ww2.nero.com/nero6/eng/Nero_MD5_Verifier.html
Here are the MD5/CRC values for x86 or x64 depending on which every ISO you downloaded:
x86 - File Size = 3.12 GB (3,355,598,848 bytes) - CRC Value = 0x67E089E0 - MD5 Value = 0E733AB1A8E8FF9A8684FD3639332773 x64 - File Size = 4.01 GB (4,309,368,832 bytes) - CRC Value = 0x48697711 - MD5 Value = E43502D0A15EADD551119D5639859E04
Paste the MD5 Checksum for either x64 or x86 depending on which one you want check in Step 1, Step 2 - Browse to where you stored the ISO on your drive and open it and it will automatically start the varification process and generate the has in the third field, if it matches Step 1, then you are safe.
-- -- Andre Windows Connected | http://www.windowsconnected.com Extended64 | http://www.extended64.com Blog | http://www.extended64.com/blogs/andre http://spaces.msn.com/members/adacosta
"Chris H." wrote in message Whichever one the first phase is, this is where it freezes. Like I said, I get the XP-like loading screen where it says "Microsoft Corporation 2006" or something along those lines. When that stops, I get this blue-teal screen and a cursor appears. There's nothing that happens after that, I have control of the cursor for a little while, then it just freezes and I can't move the cursor any more. As far as I can tell there's nothing that gets copied or loaded (at least there's no indication that there is).
"Andre Da Costa [Extended64]" wrote:
Well, there are many colored phases of setup, where did you reach? Did it begin copying files? Did it almost complete setup? How was setup launched, from within an existing version of Windows or your booted from the DVD? -- -- Andre Windows Connected | http://www.windowsconnected.com Extended64 | http://www.extended64.com Blog | http://www.extended64.com/blogs/andre http://spaces.msn.com/members/adacosta
"Chris H." <Chris H.@discussions.microsoft.com> wrote in message Hi, I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
My hardware configuration is as follows
AMD Opteron 165 (dual-core) CPU Asus A8R MVP (05/03 BIOS) Sapphire X800GTO2 256 MB PCIe video card Seagate 7200.7 200 GB hard drive (with several partitions) Pioneer 109 DVD-ROM NEC 2510 DVD burner (used to install)
Any ideas what's causing the problem?
I'm getting this problem on my Compaq computer (V2000Z) running an AMD Turion64 ML-37 (2.0ghz, which in Pentium terms, is probably 2.8+)
exact same problem. I get a little farther along than you -- I am able to click "install now" -- but it freezes on "Please wait..." and then throws an exception.
The burn is fine, and it's getting EXTREMELY obnoxious that all anyone on here suggests is to reburn the ISO. The burn is NOT the problem.
"Chris H." wrote:
Hi, I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
My hardware configuration is as follows
AMD Opteron 165 (dual-core) CPU Asus A8R MVP (05/03 BIOS) Sapphire X800GTO2 256 MB PCIe video card Seagate 7200.7 200 GB hard drive (with several partitions) Pioneer 109 DVD-ROM NEC 2510 DVD burner (used to install)
Any ideas what's causing the problem?
"hegemon" wrote:
I'm getting this problem on my Compaq computer (V2000Z) running an AMD Turion64 ML-37 (2.0ghz, which in Pentium terms, is probably 2.8+)
exact same problem. I get a little farther along than you -- I am able to click "install now" -- but it freezes on "Please wait..." and then throws an exception.
The burn is fine, and it's getting EXTREMELY obnoxious that all anyone on here suggests is to reburn the ISO. The burn is NOT the problem.
It doesn't help that most of the questions being asked in the forum are obviously not being asked by "developers, IT professionals and technology experts". If the MVPs weren't so tied up answering questions like "can I install on my E: drive instead of my C: drive?", something might actually get accomplished here.
I'm having nearly the same problem as you, except that I don't get to the "install now" prompt. The system locks up (mouse freezes, with no drive activity), and reboots spontaneously 20-30 seconds later.
"Chris H." wrote:
I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
I am also seeing freezes on the Vista x64 beta. But where it freezes is totally random.
Each boot goes through the "loading files" progress bar on a black screen. Past that the screen with the side scrolling grey dot passes and the Vista installer starts. From here it crashes at any point and gives me no notification of doing so (I usually notice when the optical mouse powers down).
So far, it has frozen 3-4 times whilst initialising the keyboard and mouse before showing the initial install window, numerous times at any arbitrary point between entering the product key and creating a partition to install to, and once it even got to copying the files from the DVD and made it to the "Expanding Files" phase of installing before freezing totally. All freezes have happened once the GUI has started (note: not the black screen).
My hardware is: AMD Athlon 64 4000+ in an Asus A8V-E Deluxe motherboard 2GB ECC registered DDR400 (PC3200) memory 200GB Seagate SATA drive nVidia GeForce 6600GT video card
My DVD has verified as burning correctly, with MD5 sum of E43502D0A15EADD551119D5639859E04.
"Chris H." wrote:
I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
I am also seeing freezes on the Vista x64 beta. But where it freezes is totally random.
Each boot goes through the "loading files" progress bar on a black screen. Past that the screen with the side scrolling grey dot passes and the Vista installer starts. From here it crashes at any point and gives me no notification of doing so (I usually notice when the optical mouse powers down).
So far, it has frozen 3-4 times whilst initialising the keyboard and mouse before showing the initial install window, numerous times at any arbitrary point between entering the product key and creating a partition to install to, and once it even got to copying the files from the DVD and made it to the "Expanding Files" phase of installing before freezing totally. All freezes have happened once the GUI has started (note: not the black screen).
My hardware is: AMD Athlon 64 4000+ in an Asus A8V-E Deluxe motherboard 2GB ECC registered DDR400 (PC3200) memory 200GB Seagate SATA drive nVidia GeForce 6600GT video card
My DVD has verified as burning correctly, with MD5 sum of E43502D0A15EADD551119D5639859E04.
"Chris H." wrote:
My hardware configuration is as follows Asus A8R MVP (05/03 BIOS)
Actually, I've done a bit of googling and found a post in a web forum (http://www.planetamd64.com/index.php?showtopic=22946) that might be relevant.
To the best of my knowledge, most Asus Athlon 64 motherboards have a Marvell Yukon (SysKonnect Genesis) gigabit ethernet interface. The post to the forum suggests that this may be causing the lockup - my motherboard (an Asus A8V-E Deluxe) has such an interface.
Try disabling the onboard gigabit interface before installation. I'll report if this works for me later.
I have this same problem. I try installing 64 bit Vista from a burned DVD and it begins to load, but then freezes a little while after the cursor appears. Then the screen goes black and it just sits there. My specs are:
Athlon 64 3400+ Asus A8V Deluxe Creative Audigy 2 ZS ATI AIW X800 XT 120gb Maxtor HD 40gb Western Digital HD
"Rob" wrote:
"Chris H." wrote: My hardware configuration is as follows Asus A8R MVP (05/03 BIOS)
Actually, I've done a bit of googling and found a post in a web forum (http://www.planetamd64.com/index.php?showtopic=22946) that might be relevant.
To the best of my knowledge, most Asus Athlon 64 motherboards have a Marvell Yukon (SysKonnect Genesis) gigabit ethernet interface. The post to the forum suggests that this may be causing the lockup - my motherboard (an Asus A8V-E Deluxe) has such an interface.
Try disabling the onboard gigabit interface before installation. I'll report if this works for me later.
I am having that problem as well. My specs are Intel Pentium D 805 1GB DDR2 4200 RAM Soundblaster sound card Nvidia GeForce 7300GS ECS RC410L/800-M DVDRW drive DVD-rom drive 200GB Maxtor SATA HDD
"marksoccer105" wrote:
I have this same problem. I try installing 64 bit Vista from a burned DVD and it begins to load, but then freezes a little while after the cursor appears. Then the screen goes black and it just sits there. My specs are:
Athlon 64 3400+ Asus A8V Deluxe Creative Audigy 2 ZS ATI AIW X800 XT 120gb Maxtor HD 40gb Western Digital HD
"Rob" wrote:
"Chris H." wrote: My hardware configuration is as follows Asus A8R MVP (05/03 BIOS)
Actually, I've done a bit of googling and found a post in a web forum (http://www.planetamd64.com/index.php?showtopic=22946) that might be relevant.
To the best of my knowledge, most Asus Athlon 64 motherboards have a Marvell Yukon (SysKonnect Genesis) gigabit ethernet interface. The post to the forum suggests that this may be causing the lockup - my motherboard (an Asus A8V-E Deluxe) has such an interface.
Try disabling the onboard gigabit interface before installation. I'll report if this works for me later.
I think I found the problem with the windows 64-bit version. I got the installer to show the windows files as it loaded them and it froze right after it loaded disk.sys.
"Chris H." wrote:
Hi, I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
My hardware configuration is as follows
AMD Opteron 165 (dual-core) CPU Asus A8R MVP (05/03 BIOS) Sapphire X800GTO2 256 MB PCIe video card Seagate 7200.7 200 GB hard drive (with several partitions) Pioneer 109 DVD-ROM NEC 2510 DVD burner (used to install)
Any ideas what's causing the problem?
How did you get the installer to show the windows files as it loads them?
Anyhow, I don't think the Marvell integrated Ethernet controller is the problem. I disabled everything (sound, FireWire, parallel ports, etc), unplugged everything from USB apart from keyboard and mouse and it still didn't work for me. I got the exact same result, it froze in the same spot. I think I might connect a PS/2 mouse and keyboard to disable USB and see if that changes anything.
If that doesn't work, that'll be the end of my troubleshooting, I don't really have the patience to debug Microsoft's beta software; especially since it seems no one at MS is interested in helping with the issue.
"betatester" wrote:
I think I found the problem with the windows 64-bit version. I got the installer to show the windows files as it loaded them and it froze right after it loaded disk.sys.
"Chris H." wrote:
Hi, I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
My hardware configuration is as follows
AMD Opteron 165 (dual-core) CPU Asus A8R MVP (05/03 BIOS) Sapphire X800GTO2 256 MB PCIe video card Seagate 7200.7 200 GB hard drive (with several partitions) Pioneer 109 DVD-ROM NEC 2510 DVD burner (used to install)
Any ideas what's causing the problem?
Well I finally managed to solve the problem by installing via the Pioneer DVD-ROM. I'm still not sure why the NEC DVD burner was a no-go but once I changed the bootable optical drive to be the Pioneer drive it worked correctly. As a matter a fact, I am typing this from Vista.
"Chris H." wrote:
How did you get the installer to show the windows files as it loads them?
Anyhow, I don't think the Marvell integrated Ethernet controller is the problem. I disabled everything (sound, FireWire, parallel ports, etc), unplugged everything from USB apart from keyboard and mouse and it still didn't work for me. I got the exact same result, it froze in the same spot. I think I might connect a PS/2 mouse and keyboard to disable USB and see if that changes anything.
If that doesn't work, that'll be the end of my troubleshooting, I don't really have the patience to debug Microsoft's beta software; especially since it seems no one at MS is interested in helping with the issue.
"betatester" wrote:
I think I found the problem with the windows 64-bit version. I got the installer to show the windows files as it loaded them and it froze right after it loaded disk.sys.
"Chris H." wrote:
Hi, I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
My hardware configuration is as follows
AMD Opteron 165 (dual-core) CPU Asus A8R MVP (05/03 BIOS) Sapphire X800GTO2 256 MB PCIe video card Seagate 7200.7 200 GB hard drive (with several partitions) Pioneer 109 DVD-ROM NEC 2510 DVD burner (used to install)
Any ideas what's causing the problem?
I thought you were watching the thread I started ("Installation from bootable DVD problem") before you started this one. We figured out three days ago that Vista won't boot properly using a NEC burner as the boot device.
"Chris H." wrote:
Well I finally managed to solve the problem by installing via the Pioneer DVD-ROM. I'm still not sure why the NEC DVD burner was a no-go but once I changed the bootable optical drive to be the Pioneer drive it worked correctly. As a matter a fact, I am typing this from Vista.
"Chris H." wrote:
How did you get the installer to show the windows files as it loads them?
Anyhow, I don't think the Marvell integrated Ethernet controller is the problem. I disabled everything (sound, FireWire, parallel ports, etc), unplugged everything from USB apart from keyboard and mouse and it still didn't work for me. I got the exact same result, it froze in the same spot. I think I might connect a PS/2 mouse and keyboard to disable USB and see if that changes anything.
If that doesn't work, that'll be the end of my troubleshooting, I don't really have the patience to debug Microsoft's beta software; especially since it seems no one at MS is interested in helping with the issue.
"betatester" wrote:
I think I found the problem with the windows 64-bit version. I got the installer to show the windows files as it loaded them and it froze right after it loaded disk.sys.
"Chris H." wrote:
Hi, I downloaded the 64-bit beta 2 and I can't seem to install it on my machine. The system doesn't even get to the point where I see a dialog box of any sort. It goes through the initial DOS-like "loading files" screen, then it goes through the XP-like loading bar, then it gets to this teal colored background screen where I get a mouse cursor and freezes there eventually.
My hardware configuration is as follows
AMD Opteron 165 (dual-core) CPU Asus A8R MVP (05/03 BIOS) Sapphire X800GTO2 256 MB PCIe video card Seagate 7200.7 200 GB hard drive (with several partitions) Pioneer 109 DVD-ROM NEC 2510 DVD burner (used to install)
Any ideas what's causing the problem?
Windows Vista
User login
Related topics
- Printer install...
- Disabling ClearType
- ATI Drivers and CODE 43 error
- Help! Can't install VISTA64 for lack of SATA hard disk drive
- Download Vista
- Spyware Blaster 3.5.1 Works In Vista
- Can not validate Beta 2 DVD?
- system hangs during start-up
- Issues in General (Dell D400)
- Screen out of Range (below 60 Hz) when starting Media Center
- Explorer from Windws XP
- How much does DVD cost?
- recovering from a nasty situation
- Aero Glass on Mobile Radeon 9600
- 32/64 Installation Quandary
- Can't change refresh rate
- Posting Problems
- Computer cant read DVD
- Connecting to Admin Share (C$)
- IE7 fails
- Great to be Here
- Wireless Network Problems
- Vista; requires 800GHZ CPU ??? Read ON
- (Sigh) Compatibility problems... Again
- vista freezes durring rebooting
- rollback Vista beta upgrade?
- No Pictures On HP Photosmart
- Vista upgrade from XP SP2
- Silicon Image 680 ATA/Raid card
- Blank Messages
- How to add additional entry for multiboot ?
- Wrong number of e-mails in total displayed
- News groups
- Vista & Office 12 = Severe Slowdown
- Vista Beta 2 and Xbox 360
- Money2005
- Where to find a Java Machine for IE7 on Vista ?
- 82801ER SATA RAID Controller
- Urgent - FX 5600 - Go for it?
- Audio driver problem